Spreader Beam Calculator

EC6 Masonry Bearing
← Back to Dashboard

1. Loading & Geometry

Wall Dimensions
Wall Loads (For Mid-Height Check)
Spreader Beam Design
?
Distance from Left Edge
Width of incoming beam
?
Distance to nearest wall end/opening
Position & Geometry Visualization

2. Masonry Properties

?

3. Stress Analysis

Eccentricity (e): - mm
Stress Max (σmax): - MPa
Stress Min (σmin): - MPa
Stress Condition: -

4. EC6 Checks & Detailing

Design Strength (fd): - MPa
Enhancement Factor (β): -
Enhanced Capacity (fRd): - MPa
Verification
Local Bearing Check (σmax ≤ fRd): -
Mid-Height Vert. Check (NEd,m ≤ NRd,m): -

Factor Breakdown (Click row)

Factor Value Clause / Note
β (Enhancement) -- Load area / Wall area
fk -- Char. Strength
fd -- Design Strength
fRd -- Local Resistance
Φm -- Capacity Reduct. Mid-Height
Spreader Geometry Limit
Min. Depth (45° Spread): - mm
Concrete Spreader w_bearing 45° h
Professional Disclaimer

StrucTalogue is a software tool intended solely as a preliminary design, analysis, and estimation aid. It does not replace professional judgment, independent verification, or formal structural engineering design. All results generated by StrucTalogue must be reviewed, checked, and approved by a qualified and licensed Professional Structural Engineer or equivalent authority prior to any real-world use.

By proceeding with using this software, you acknowledge and agree that StrucTalogue is not intended for final design, construction, permitting, or life-safety applications, and that StrucTalogue and its developers shall not be liable for any damages, losses, or claims arising from the use or misuse of the Service. Your subscription is subject to our Terms & Conditions and Privacy Policy.